TempTABs

VIEW PRODUCTS

The practical use of TempTABs is for verification of furnace uniformity and reproducibility of a specific thermal process in non-oxidizing or vacuum. TempTABs have been pretreated to remove any organics so there is no outgassing or contamination to worry about.

TempTABs were designed for the Sintering, Brazing and Heat treating of metals (ferrous and non-ferrous) but can also be used in the fast fire tile and glass to metal seal industries. TempTABs provide an easy method to digitize and record the thermal process by using a digital micrometer to measure the final TempTAB dimension, entering the dimension into the TempTAB Trakker Software that translates the final dimension into a temperature equivalent. The software allows users to store up to 360 runs in up to 9 locations. They are made from carefully controlled ceramic materials that shrink over a fairly wide temperature range. They are measured once they exit the thermal process and their dimension is used to determine the peak temperature they were exposed to.

The value of the TempTAB is to provide verification that the furnace is uniformly delivering the expected thermal profile. Software is available to automatically track your process temperatures over time in up to 9 locations by simply inputing the TempTAB dimensions from each location after each run. Temperature data is developed with a ramp rate of 5 degrees C per minute up to the setpoint, with hold times at peak temperature for 10, 30, 60, 120 and 240 minutes. Heat Treating Schedules (Insert into a hot furnace for 5 different hold times) are also available where appropriate.

Contact us today: support@ortonceramic.com or Call Us +1-614-818-1338 to speak with an expert.

TempTAB 300 25/Sleeve
P9024 300

TempTAB 300 25/Sleeve

Our Price:
$48.00

Quantity:


 

Details:

Range 850-1100C / 1562-2012F




 


 

Search
clear

FROM THE BLOG...

Introducing a new two day course: Advanced Thermal Properties of Refractories

ADVANCED THERMAL PROPERTIES OF REFRACTORIES - October 29 & 30, 2018 A Two Day Course Sponsored by...

Orton Ceramic Announces 7 New Course Offerings

In response to industry demand, Orton is offering a series of new short courses dealing with refractories...

Measuring Flexural Creep of Ceramic Investment Casting Shells

Measuring Flexural Creep of Ceramic Investment Casting Shells Understanding the creep behavior...