Refractory

ASTM C16
Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM C20
Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM C24
Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
ASTM C92
Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
ASTM C93
Cold Crushing Strength And Modulus Of Rupture Of Insulating Firebrick
ASTM C113
Standard Test Method for Reheat Change of Refractory Brick
ASTM C133
Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
ASTM C134
Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
ASTM C135
Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C179
Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
ASTM C181
Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
ASTM C182
Standard Test Method for Thermal Conductivity of Insulating Firebrick
ASTM C198
Standard Test Method for Cold Bonding Strength of Refractory Mortar
ASTM C199
Standard Test Method for Pier Test for Refractory Mortars
ASTM C201
Standard Test Method for Thermal Conductivity of Refractories
ASTM C202
Standard Test Method for Thermal Conductivity of Refractory Brick
ASTM C210
Standard Test Method for Reheat Change of Insulating Firebrick
ASTM D257
Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM C288
Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
ASTM C357
Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C403, ASTM C403M
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C417
Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM C491
Modulus Of Rupture Of Air-setting Plastic Refractories
ASTM C496
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM C577
Standard Test Method for Permeability of Refractories
ASTM C583
Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
ASTM C604
Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C605
Reheat Change Of Fireclay Nozzles And Sleeves
ASTM C621
Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
ASTM C704, ASTM C704M
Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM C830
Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C831
Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
ASTM C832
Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM C860
Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
ASTM C862
Standard Practice for Preparing Refractory Concrete Specimens by Casting
ASTM C863
Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
ASTM C865
Standard Practice for Firing Refractory Concrete Specimens
ASTM C914
Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
ASTM C973
Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
ASTM C974
Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
ASTM C975
Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
ASTM C987
Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures
ASTM C1054
Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
ASTM C1099
Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
ASTM C1113, ASTM C1113M
Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM C1171
Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
ASTM C1223
Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
ASTM C1419
Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
ASTM C1445
Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
ASTM C1446
Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM C1548
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
DIN 51053, ISO 3187
Determination of Creep or Refractoriness Under Load

View Products by Category:

 

Search
clear

FROM THE BLOG...

Artem Trofimov joins Orton

Artem Trofimov has joined Orton as a Product Specialist in our Instrument Department.   Artem's experience...

Hot Disk Instruments added to Orton's Instrument Line

Orton is pleased to announce its partnership with Hot Disk of Gothenburg, Sweden representing Hot...

Jessica Putnam-Phillips on ClayShare

Jessica explains how Pyrometric cones help the firing process.  Click here to Watch her on ClayShare...