DIN 51053, ISO 3187

Determination of Creep or Refractoriness Under Load

One cylindrical specimen (50 mm diameter x 50 mm high) is tested per firing. The percent linear change is recorded continuously during the heat-up and creep period under load. The minimum size required is a half brick. Standard conditions are 0.2 N/mm2 (29 psi) load and 50 hour hold.

  PER TEST OF 1 PER TEST OF 1 PER TEST OF 1
TEMPERATURE (50 hr hold) (100 hr hold) (RUL only)
1400°C or Less $870 $1110 $470
1400°C to 1500°C $1000 $1230 $600
1500°C to 1600°C $1125 $1365 $690
1600°C to 1650°C $1270 $1510 $785
1650°C to 1700°C $1340 $1590 $825
Other Test Conditions Quote Quote Quote

DOWNLOAD REQUEST FORM »

View Products by Category:

 

Search
clear

FROM THE BLOG...

New International Ordering Options Available

Orton has partnered with Zonos and United Parcel Service so Customers around the world can order small...

Shelf Life of Cones

Do cones have a shelf life? At the Edward Orton Jr. Ceramic Foundation, a common question asked to...

New Test Equipment Installed

Orton's Materials Testing Service Department recently added a new laser flash machine to measure thermal...