Model 1410 B



Orton Dilatometer 1410B is a basic horizontal, digital dilatometer that measures the expansion or contraction of a single test specimen from room temperature to 1000°C with on-board, stand-alone, programmable process controller and measuring head assembly equipped with LVDT sensor.

Operated according to ASTM E-228, ASTM C-372, or ISO 7991


  • Bench top instrument console
  • 1000°C horizontal tube furnace
  • programmable process controller
  • LVDT measuring head
  • Fused quartz sample holder and probe rod
  • type "N" thermocouple,
  • 1 (25.4mm) or 2" (50.8mm) calibration sample
  • computer software
  • Accessories and instruction manual. (Computer not included.)


Model DIL 1410 B
Warranty 12 Months
Temperature Range RT to 1,000°C
Furnace Tube style, 8 inch heated zone
Thermocouple Type "N" 2 wire
Sample Holder and Probe Rod Fused Quartz
Sample Size (max) 50 mm long x 20 mm round or square
LVDT Displacement Range ±0.125 inch (±3.18 mm)
Displacement Resolution 0.0000003 inch or 0.3 micro-inch (0.00001 millimeter or 0.01 microns)
PLC Resolution for a 1 Sample 0.00003%
Reproducibility Range ± 0.004 Percent Linear Change
Contact Load 113 grams
Temperature Control User Programmable, 20-segment, PID Controller with Melting Point Protection
Heating Rate 1 to 30°C/minuteProgrammable at 0.01°C increments
Power Requirements 120vac/10amp or 240vac/5amp 50/60Hz
Data Acquisition On-board Process controller - data stored at 1°C increments, real-time data collection or data retrieval to computer
Data Analysis Remote programming and analysis Software (Requires English Language Version of Windows OS)
Computer Interface USB
Factory Calibration high purity platinum
Calibration Sample 99.8 Alumina; Platinum available as Option
Fused Silica Calibration Sample Optional
Bench-top Footprint (open)Length x Depth x Height 31 x 12 x 14 (788 x 305 x 356 mm)

View Products by Category:




TempTab Brochure for the Dental Industry Announced

Verifying temperatures in your Sintering Furnace?  The August Buyers Guide of LMT magazine offers TempTab...

High Temperature Ceramics for Extreme Environments Workshop - June 18 & 19, 2019

The Ohio State University College of Engineering Department of Materials Science and Engineering...

2019 Introduction to Refractories Short Course

Orton's 2019 "Introduction to Refractories" short course is coming up in August. This course is an intensive...