Self-Supporting Cones

Self-Supporting Cones are the most accurate and easiest to use witness cones available. They provide the same information as Orton Large Cones. The advantage of Self-Supporting cones is that they are the correct height (1 3/4" exposed above the base) and have the 8 degree bending angle built in. They do not require plaques. Self-Supporting cones can be set on any flat surface.

Self-Supporting Cones are available for use between 1087F and 3106F (586C and 1708)C. Cones are numbered from 022 to 32. Cone 022 is the cone that will deform at the lowest temperature (1087F) and cone 32 is the cone that deforms at the highest temperature 3106F (1708C).

Self Supportiong Cones are recomended by glaze and kiln manufacturers to achieve the best results.

View Products by Category:

1 - 20 of 70

Cone Template Centigrade

Pocket Size Measuring Template for Orton Large and Self- Supporting Cones....

$1.00

Cone Template Fahrenheit

Pocket Size Measuring Template for Orton Large and Self-Supporting Cones. ...

$1.00

010 SELF-SUPPORTING, 25/BOX

Contains Red Iron Oxide

$9.90

09 SELF-SUPPORTING, 25/BOX

Contains Red Iron Oxide

$9.90

08 SELF-SUPPORTING, 25/BOX

Contains Red Iron Oxide

$9.90

Go to page:  1 2 3 4

 

Search
clear

FROM THE BLOG...

Hot Disk Instruments added to Orton's Instrument Line

Orton is pleased to announce its partnership with Hot Disk of Gothenburg, Sweden representing Hot...

Jessica Putnam-Phillips on ClayShare

Jessica explains how Pyrometric cones help the firing process.  Click here to Watch her on ClayShare...

Sue McLeod and Witness Cones

We ran across this recent post from Sue McLeod that explains why she uses Witness Cones in her firings. ...