Standard Practice for Firing Refractory Concrete Specimens
Firing schedules are for five refractory concrete specimens made in accordance with ASTM C-862 and classified by ASTM C-401. Price includes linear change measurement.
|REGULAR TYPE||INSULATING TYPE||PER TEST OF 5|
|Class N, 1700°F||$540|
|Class O, 1900°F||$560|
|Class A, 2000°F||$580|
|Class B, 2300°F||$630|
|Class P, 2100°F||$705|
|Class C, 2500°F||Class Q, 2300°F||$720|
|Class D, 2700°F||Class R, 2500°F||$770|
|Class E, 2900°F||Class S, 2700°F||$910|
|Class T, 2900°F||$1075|
|Class F, 3100°F||Class U, 3000°F||$1090|
|Class G, 3200°F||Class V, 3200°F||$1130|
SIGNIFICANCE AND USE
This practice is used to standardize the firing conditions of refractory concrete specimens prepared in accordance with Practice C 862. The standards are set down to minimize laboratory-to-laboratory variation and do not attempt to duplicate any particular field applications.
1.1 This practice covers the firing of specimens made from refractory concretes (castable refractories) in accordance with Practice C862 for cast specimens. The procedure is also recommended for heating rates to be used for high-temperature test methods such as Methods C16, C583, etc., when these methods are used to test refractory concretes.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Extracted, with permission, from ASTM C865 Standard Practice for Firing Refractory Concrete Specimens, copyright ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428. A copy of the standard may be purchased from ASTM International, phone 610-832-9555, e-mail: firstname.lastname@example.org, website:www.astm.org.
FROM THE BLOG...
Orton's 2019 "Introduction to Refractories" short course is coming up in August. This course is an intensive...
01/18/2019New Laboratory Training Course Announced
LABORATORY TRAINING - THERMAL PROPERTIES OF REFRACTORIES - March 19, 20 & 21, 2019 A Three Day Course...
ADVANCED THERMAL PROPERTIES OF REFRACTORIES - October 29 & 30, 2018 A Two Day Course Sponsored by...