DIN 51053, ISO 3187

Determination of Creep or Refractoriness Under Load

One cylindrical specimen (50 mm diameter x 50 mm high) is tested per firing. The percent linear change is recorded continuously during the heat-up and creep period under load. The minimum size required is a half brick. Standard conditions are 0.2 N/mm2 (29 psi) load and 50 hour hold.

  PER TEST OF 1 PER TEST OF 1 PER TEST OF 1
TEMPERATURE (50 hr hold) (100 hr hold) (RUL only)
1400°C or Less $840 $1070 $455
1400°C to 1500°C $965 $1190 $585
1500°C to 1600°C $1085 $1315 $670
1600°C to 1650°C $1230 $1460 $755
1650°C to 1700°C $1295 $1530 $795
Other Test Conditions Quote Quote Quote

DOWNLOAD REQUEST FORM »

View Products by Category:

 

Search
clear

FROM THE BLOG...

TempTab Brochure for the Dental Industry Announced

Verifying temperatures in your Sintering Furnace?  The August Buyers Guide of LMT magazine offers TempTab...

High Temperature Ceramics for Extreme Environments Workshop - June 18 & 19, 2019

The Ohio State University College of Engineering Department of Materials Science and Engineering...

2019 Introduction to Refractories Short Course

Orton's 2019 "Introduction to Refractories" short course is coming up in August. This course is an intensive...