Model 1410 B
Orton Dilatometer 1410B is a basic horizontal, digital dilatometer that measures the expansion or contraction of a single test specimen from room temperature to 1000°C with on-board, stand-alone, programmable process controller and measuring head assembly equipped with LVDT sensor.
Operated according to ASTM E-228, ASTM C-372, or ISO 7991
- Bench top instrument console
- 1000°C horizontal tube furnace
- programmable process controller
- LVDT measuring head
- Fused quartz sample holder and probe rod
- type "N" thermocouple,
- 1 (25.4mm) or 2" (50.8mm) calibration sample
- computer software
- Accessories and instruction manual. (Computer not included.)
|Model||DIL 1410 B|
|Temperature Range||RT to 1,000°C|
|Furnace||Tube style, 8 inch heated zone|
|Thermocouple||Type "N" 2 wire|
|Sample Holder and Probe Rod||Fused Quartz|
|Sample Size (max)||50 mm long x 20 mm round or square|
|LVDT Displacement Range||±0.125 inch (±3.18 mm)|
|Displacement Resolution||0.0000003 inch or 0.3 micro-inch (0.00001 millimeter or 0.01 microns)|
|PLC Resolution for a 1 Sample||0.00003%|
|Reproducibility Range||± 0.004 Percent Linear Change|
|Contact Load||113 grams|
|Temperature Control||User Programmable, 20-segment, PID Controller with Melting Point Protection|
|Heating Rate||1 to 30°C/minuteProgrammable at 0.01°C increments|
|Power Requirements||120vac/10amp or 240vac/5amp 50/60Hz|
|Data Acquisition||On-board Process controller - data stored at 1°C increments, real-time data collection or data retrieval to computer|
|Data Analysis||Remote programming and analysis Software (Requires English Language Version of Windows OS)|
|Factory Calibration||high purity platinum|
|Calibration Sample||99.8 Alumina; Platinum available as Option|
|Fused Silica Calibration Sample||Optional|
|Bench-top Footprint (open)Length x Depth x Height||31 x 12 x 14 (788 x 305 x 356 mm)|
FROM THE BLOG...
Orton's 2019 "Introduction to Refractories" short course is coming up in August. This course is an intensive...
01/18/2019New Laboratory Training Course Announced
LABORATORY TRAINING - THERMAL PROPERTIES OF REFRACTORIES - March 19, 20 & 21, 2019 A Three Day Course...
ADVANCED THERMAL PROPERTIES OF REFRACTORIES - October 29 & 30, 2018 A Two Day Course Sponsored by...