Model 1416 STD
Orton dilatometer Model 1416STD is a horizontal, digital dilatometer that measures the expansion or contraction of a single test specimen from room temperature to 1600°C with on-board, stand-alone, programmable process controller and linear motion measuring head assembly equipped with LVDT sensor.
Operated according to ASTM E-228, ASTM C-372, or ISO 7991
- Bench top instrument console
- 1600°C water cooled furnace with SiC element
- Programmable process controller
- Alumina sample holder and alumina probe rod
- type "S" thermocouple
- 1 (25.4mm) or 2" (50.8mm) calibration sample
- computer software
- Accessories and instruction manual. (Computer not included.)
|Model||DIL 1416 STD|
|Temperature Range||RT to 1600°C|
|Furnace||Tube style, 4 inch hot zone|
|Thermocouple||Type "S 3 wire|
|Sample Holder and Probe Rod||Alumina (Fused Quartz optional)|
|Sample Size (max)||50 mm long x 10 mm round or square|
|LVDT Displacement Range||±0.125 inch (±3.18 mm)|
|Displacement Resolution||0.0000003 inch or 0.3 micro-inch (0.00001 millimeter or 0.01 microns)|
|PLC Resolution for a 1 Sample||0.00003%|
|Reproducibility Range||± 0.008 Percent Linear Change|
|Contact Load||Adjustable - minimum 4 grams / 3.9cn|
|Temperature Control||User Programmable, 20-segment, PID Controller with Melting Point Protection|
|Heating Rate||1 to 20°C/minute Programmable at 0.01°C increments|
|Power Requirements||208-240vac, 20amp 50/60Hz|
|Data Acquisition||On-board Process controller - data stored at 1°C increments, real-time data collection or data retrieval to computer|
|Data Analysis||Remote programming and analysis Software (Requires English Language Version of Windows OS)|
|Factory Calibration||high purity platinum|
|Calibration Sample||99.8 Alumina (Platinum available as Option)|
|Water Cooled Bulkhead||Optional (water circulation system not included)|
|Measuring Head Cover||Optional|
|Controlled Atmosphere Option||Optional|
|Vacuum 10-2 torr||Optional|
|Bench-top Footprint Length x Depth x Height||31 x 12 x 14 (788 x 305 x 356 mm)|
FROM THE BLOG...
Verifying temperatures in your Sintering Furnace? The August Buyers Guide of LMT magazine offers TempTab...
The Ohio State University College of Engineering Department of Materials Science and Engineering...
Orton's 2019 "Introduction to Refractories" short course is coming up in August. This course is an intensive...