Self-Supporting Cones

Self-Supporting Cones are the most accurate and easiest to use witness cones available. They provide the same information as Orton Large Cones. The advantage of Self-Supporting cones is that they are the correct height (1 3/4" exposed above the base) and have the 8 degree bending angle built in. They do not require plaques. Self-Supporting cones can be set on any flat surface.

Self-Supporting Cones are available for use between 1087F and 3106F (586C and 1708)C. Cones are numbered from 022 to 32. Cone 022 is the cone that will deform at the lowest temperature (1087F) and cone 32 is the cone that deforms at the highest temperature 3106F (1708C).

Self Supportiong Cones are recomended by glaze and kiln manufacturers to achieve the best results.

View Products by Category:

1 - 20 of 70

Cone Template Centigrade

Pocket Size Measuring Template for Orton Large and Self- Supporting Cones....

$1.00

Cone Template Fahrenheit

Pocket Size Measuring Template for Orton Large and Self-Supporting Cones. ...

$1.00

010 SELF-SUPPORTING, 25/BOX

Contains Red Iron Oxide

$9.36

09 SELF-SUPPORTING, 25/BOX

Contains Red Iron Oxide

$9.36

08 SELF-SUPPORTING, 25/BOX

Contains Red Iron Oxide

$9.36

Go to page:  1 2 3 4

 

Search
clear

FROM THE BLOG...

TempTab Brochure for the Dental Industry Announced

Verifying temperatures in your Sintering Furnace?  The August Buyers Guide of LMT magazine offers TempTab...

High Temperature Ceramics for Extreme Environments Workshop - June 18 & 19, 2019

The Ohio State University College of Engineering Department of Materials Science and Engineering...

2019 Introduction to Refractories Short Course

Orton's 2019 "Introduction to Refractories" short course is coming up in August. This course is an intensive...