Testing Services - Advanced Ceramic


We offer a wide variety of materials testing services that are listed below. You can download the testing request form here or contact or team to help answer any questions you may have and help schedule your testing service: rayner@ortonceramic.com or Call Us +1-614-818-1321​

 

 

ASTM C1161

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature:

Flexural strength is determined in three-point or four-point bending on bars of rectangular cross-section. Testing of ten specimens per type/brand is recommended by ASTM.

ASTM C1211

FLEXURAL STRENGTH OF ADVANCED CERAMICS AT ELEVATED TEMPERATURE

Flexural strength is determined in three-point or four-point bending on bars of rectangular cross-section. Testing of ten specimens per type/brand is recommended by ASTM.

ASTM C1259

Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration

A non-destructive sonic method is used to determine the modulus of elasticity and modulus of rigidity for calculation of Poisson's Ratio. Bars of rectangular cross-section are used for the measurements.

ASTM C1341

Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

Flexural strength is determined in three-point or four-point bending on bars of rectangular cross-section. Testing of ten specimens per type/brand is recommended by ASTM.

ASTM C1421

Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

Fracture toughness is determined in three-point or four-point bending on chevron-notched bars of rectangular cross-section. Testing of four specimens per type/brand is recommended by ASTM.

ASTM C1424

MONOTONIC COMPRESSIVE STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE

ASTM C1499

Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

Equibiaxial strength is determined by concentric ring configurations under monotonic uniaxial loading.

ASTM E112

Standard Test Methods for Determining Average Grain Size

Average grain size is determined by the linear intercept method on a polished section by optical microscopy.

ASTM E-494

ULTRASONIC VELOCITY IN MATERIALS

A non-destructive sonic method is used to determine the longitudinal and transverse velocities for the calculatio of the modulus of elasticity, modulus of rigidity, and Poisson's Ratio.  Specimens with parallel sides are used for the measurment.

Machining Services

Machining Services

Machining services for advanced ceramic test coupons include diamond cutting, coring, and surface grinding.

Contact us today: rayner@ortonceramic.com or Call Us +1-614-818-1321 to speak with an expert.

 

 

Advanced Ceramic

Carbon

Concrete

Fibrous Insulation

Glass

Refractory

Thermal Analysis

Whiteware

Labor and Consulting Charges

Short Courses