Standard Test Method for Disintegration of Carbon Refractories by Alkali
Ten 2" cube specimens are required by ASTM. A 1" hole is drilled into the face of each specimen and filled with 8 gm of Potassium Carbonate. The effects of being fired at 1750°F for 5 hours are determined visually.
The disintegration of carbon refractories by alkali attack at elevated temperatures is an important consideration in using these materials for certain applications. Disruption of carbon refractories in the test is sensitive to a number of variables, including alkali concentration, temperature, and the presence of water vapor. The procedure is suitable for guidance in product development and for relative comparisons in application work such as in blast furnace service.
1.1 This test method covers the behavior of carbon refractories when subjected to the action of an alkali at an elevated temperature. This destructive condition as encountered in service is accelerated in the test to show in a short time the probable behavior of the carbon refractory during use.
Extracted, with permission, from ASTM C454 Standard Test Method for Disintegration of Carbon Refractories by Alkali, copyright ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428. A copy of the standard may be purchased from ASTM International, phone 610-832-9555, e-mail: email@example.com, website: www.astm.org.
Fulfilling the directive of our founder and benefactor, the Edward Orton Jr. Ceramic Foundation deploys its profits to support studies and research at the university level to promote and advance the science of materials processing.